Set Contents; User Manual; How Does It Work - Marmitek Invisible Control 6 XTRA Modo De Empleo

2. SET CONTENTS

1x IR Receiver + adhesive strip
1x IR Smart module + adhesive strip
1x IR Extender cable with one IR blaster LED + adhesive strip
2x IR Extender cable with two IR blaster LEDs + adhesive strip
1x Power Adapter
1x User manual

3. HOW DOES IT WORK?

Place your A/V equipment inside a closed (TV) cabinet. The IR
receiver (1) should be installed within your remote control's line of
sight. Stick the Blaster LEDs (2) marked 'IR OUT' wherever you
like inside the (TV) cabinet, enabling you to operate all A/V
equipment in the same compartment. Stick the Blaster LED (3)
marked 'IR TV' on the outside of the (TV) cabinet on or within sight
of your TV's IR sensor. Then store the IR Smart Module (4) neatly
away.
Point the remote at the small IR receiver to send the desired
command to the 'IR OUT' Blaster LEDs (2); these will instantly
transfer the infrared command to the A/V equipment inside the
(TV) cabinet. The 'IR TV' Blaster LED (3) is only operated using
your smartphone/tablet.
4 © MARMITEK