Mounting Location - SAS BAZOOKA MARDI GRAS Manual De Instalación

Before you start the installation, it will be necessary to find a mounting location for the
amplifier. Find a location in which the amplifier will receive adequate ventilation in order
to dissipate the heat it develops during operation. Two popular mounting locations are in
the trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when mounting
amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank in
the automobile. Make sure you know where they are when mounting the amplifier to avoid
puncturing lines, shorting wires or drilling holes in the gas tank. Once you are ready, use a
pencil to mark the mounting holes in the bottom panel. After you have marked the locations
of the holes move amplifier out of the way and drill small starter holes to make the tapping
screws easier to install. Use provided screws to tighten down the amplifie
M
OUNTING LOCATION
SUBSONIC XOVER
REMOTE SOURCE
PHASE
FREQ Hz FREQ Hz
30
10
IN NORMAL
80 OUT
SLAVE
250
L R
+ - +
BASS
BOOST
30 0
MIN
dB
SPEAKER
125 15 MAX
LEVEL IN
FREQ Hz BASS BOOST GAIN
.4V - 12.2V
6
SLAVE IN INPUT
PWR \
PROT
L
-
R
SLAVE OUT
MGA AMPLIFIERS
r.