Cleaning And Maintenance; Transport And Storage - Lumex LX5000 Manual De Usuario

CLEANING AND MAINTENANCE

Use a clean, soft cloth and warm water to clean the rollator frame, handles, and wheels. Rinse
and air dry.
s NOTICE: Do NOT use solvents and other cleaning solutions to clean the frame or the
fabric of this product.
Check fit and tightness of all nuts, bolts and knobs weekly.
WARNING: Inspect the rollator weekly for proper function and wear. If any component is
not in proper working order or appears worn, contact your GF authorized distributor for
repair and/or appropriate replacement parts.
WARNING: The use of non-Lumex
create a hazardous condition resulting in serious personal injury.

TRANSPORT AND STORAGE

The rollator is designed for easy folding and storage.
To Fold for Transport
1. Pull the strap on the middle of the seat
up to release the seat from the seat
support bars.
2. Push the handles together; the
rollator will fold easily and be ready
for transport.
To Store
1. Adjust the handle height to the
lowest position.
2. Pull the strap on the middle of the seat
up to release the seat from the seat
support bars.
3. Lay the rollator on the floor to fold the
front wheels.
4. Remove the front locking knobs: Turn
the lock knobs counterclockwise,
remove them, and store them with the
rollator. Fold the front wheels as shown
at right.
5. It is not required that you remove the
storage bag from the rollator.
6. For long periods of storage, remove the
backrest from the frame by sliding the
frame key out from the backrest slot on
each side.
LX5000-INS-LAB-RevA18
®
replacement parts will void the warranty, and could
handle
Prepare for Transport / Storage
seat strap
height adjustment
locking button
front wheel
rear wheel
9