Samsung SEB-100 Guia Del Usuario página 2

CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
E
REMOVE REAR COVER. NO
USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED
SERVICE PERSONNEL.
1. Make sure that the cable is plugged in securely before using.
(A loose connection may result in fire.)
2. When installing the SEB-100 on a wall or ceiling, mount it safely
and securely. (A falling SEB-100 may cause personal injury.)
3. Do not place conductive objects (e.g., screwdrivers, coins, and
metal things) or containers filled with water on top of the camera.
(Serious injury may result from fire, electrical shock, or falling
objects.)
4. Do not install in a sooty, dusty, or humid location.
(Doing so may cause fire or electrical shock.)
5. If any unusual smells or smoke come from the unit, stop using
the product. In such case, immediately disconnect the power
source and contact the service center. (Continued use in such
a condition may cause fire or electrical shock.)
6. If this product fails to operate normally, contact the store of
purchase or your nearest service center. Never disassemble or
modify this product in any way. (The manufacturer is not liable for
any damage resulting from unauthorized disassembly or repairs.)
2
This symbol indicates high voltage
is present inside. It is dangerous to
make any kind of contact with any
inside part of this product.
This symbol alerts you that
important literature concerning
operation and maintenance has
been included with this product.
7. When cleaning, do not spray water directly onto parts of the
product. (Doing so may cause fire or electrical shock.) Wipe the
surface with a dry cloth. Never use detergents or chemical
cleaners on the product, as this may result in discoloration of
surface or cause damage to the finish.
1. Do not drop objects on the product or apply strong shock to it.
Keep away from a location subject to excessive vibration or
magnetic interference.
2. Do not install in a location subject to high temperature (over 50°C),
low temperature (below -10°C), or high humidity.
(Doing so may cause fire or electrical shock).
3. Do not put SEB-100 in rainfall or humidity nor operate it in a wet
place. (If it gets wet, turn off the power immediately and call the
certified service center.)
4. Avoid a location which is exposed to direct sunlight, or near heat
sources such as heaters or radiators. (Neglecting to do so may
result in a risk of fire).
5. If you want to relocate the already installed product, be sure to
turn off the power and then move or reinstall it.
6. Install in a well - ventilated location.
7. Remove the power plug from the outlet when there is a lightning
storm. (Neglecting to do so may cause fire or damage to the
product.)
E
3