Before Beginning; Connections - Denon DP-29F Instrucciones De Operación

3

CONNECTIONS

Before beginning

• Turn off components.
• Connect the power cord last.
• Connect everything securely. Loose connections can lead to
L
distortion.
R
L
R
Connections
Connect the Left and Right PIN-plugs of the
1
turntable's output cord to your amplifier's PHONO
jacks etc.
Connect the ground wire of the turntable to your
2
amplifier's SIGNAL GND (Ground) terminal securely.
After all connections have been made.
• Connect the turntable's power cord to the AC OUTLET
3
of your stereo amplifier, optional audio timer or directly
to a household AC outlet.
NOTE:
• If the platter starts rotating when the power cord is
connected, press the STOP button once.
L
R
DP-29F
3
• To prevent damage to cords, connect and disconnect by holding
the plug, not the cord.
• Make sure that you connect the white PIN-plug to the left (L-
white) jack and the red PIN-plug to the right (R-red) jack.
Amplifier
INPUTS PB
CD DVD/AUX AUX-2 TAPE MD
1 2
SYSTEM
L
CONNECTOR
R L
SIGNAL
GND
TUNER PHONO TAPE MD
L
R
R
SPEAKER SYSTEM
REC
SPEAKER IMPEDANCE
2 1
Power cord and plug
Left (White) and Right (Red)
out PIN-plugs
Ground wire
4 16
ENGLISH
7