Parts And Features - Hamilton Beach 38541 Manual Del Usuario

840179900 ENnv03.qxd:Layout 1

Parts and Features

Before First Use: Wash all parts in hot, soapy water.
Rinse and dry thoroughly.
Drip Drain
Drip
Handles
Cup
Nonstick
Griddle
Warming
Tray
5/5/09 11:26 AM Page 3
Splashguard
Temperature-Controlling Plug
How to Assemble
A Phillips-head screwdriver is required. Do not use an electric or
power screwdriver since they may strip and/or damage the screws.
Wash and dry all parts thoroughly before use.
1
2
Turn griddle upside down. Align
handles with screw posts on bottom
of unit. Put split lock washer and then
long screw in place. Secure long
screw with a Phillips-head screwdriver.
NOTE: The assembled unit should
appear as shown on the front cover
of this Use & Care Guide. Handles
are not intended to be removed
after installation.
If desired, attach the splashguard
to griddle. Align the cutout notches
along the back of the unit. The splash-
guard should rest on the back of the
griddle. It is not attached with any
screws.
3