INSTRUCTION
AV-800-Z / AV-800-NFZ series is lightweight, high performance, high efficiency, durable, switching power supply and with
highly visible back light, easy to read dual meters.
Specification
AC 90~125 or AC 200~240
Input voltage:
inside selectable
Output voltage:
DC 0.0V~24V variable
Protection:
Short protection: it will reduce the output voltage down
to 0.1v Amps down to 0.4Amps and the warning led will
light up
When short condition remove it will automatic restart
the power supply to normal condition
Output current (max):
AV-825-Z
AV-815-Z
Dimension
Function Description
4. Noise Offset knob (only NFZ series): Adjust the switching frequency of the power supply from 19kHz~31kHz. this
function is special design for communication radio use. when you meet noise from the radio try to turn this knob
clockwise or counter clockwise it can reduce the noise output of the radio.
Factory preset this knob at center position.
5. Amps indicator meter: Display the output current when connect any device
6. Voltage indicator meter: Display the output voltage.
AV-800-Z / AV-800-NFZ SERIES
SWITCHING POWER SUPPLY
DC 24 V
DC 16 V
9 A.
17 A.
6 A.
13 A.
165(D) x 147(W) x 55(H) mm
Output voltage regulation:
Ripple:
Overload protection: same as above
Over voltage protection (if over DC 24V): same as above
Over temperature protection: AV-800-Z series has two
stage over temperature protection function.
DC 12 V
18 A.
15 A.
Weight
1. Power indicator : Light up when the unit turn
on.
2. Warning indicator: Light up when output
terminal short or over load, over voltage (preset
DC 24V), component over hot.
3. Voltage adjust knob: Turn clockwise increase
the output voltage, when at center position
factory preset DC 13.8v.
Less than 1%
Less than 9mVp-p at rated load
DC 5 V
DC 3 V
20 A.
21 A.
20 A.
21 A.
AV-815-Z: 1.0 Kg.
AV-825-Z: 1.1 Kg.