Clevo N85Xn Guia Del Usuario Concisa página 24

Fan (System Monitor)
You can set the fan speed to Maximum (full power), Au-
tomatic or Custom from this menu item. The fan speed
will adjust itself automatically to control the heat of the
CPU/GPU. You can use the Offset slider to adjust the set-
tings to your preference. However you can adjust the set-
ting to Maximum if you prefer.
The Custom setting allows you to click and drag on any
of the 2 midrange nodes on the graph in order to adjust the
temperature parameters of the CPU Fan or GPU Fan.
All these settings can be overidden by the system, as a
safety precaution, if it requires heavier use of the fan.
20
Memory (System Monitor)
You can adjust the Memory setting by clicking the
DIMM Profile for Default, XMP1 or Custom (you can
then adjust individual settings), then click Save to retain
the setting changes.
Overclocking Issues
If you get any system errors, e.g. a black screen, to reset
the computer press and hold the power button to force
the system to shutdown. To restart press and hold the
power button while holding down the Fn + D keys. This
will change the overclocking settings back to the disabled
state.
Note overclocking the system may cause hardware dam-
age and is enabled at the user's own risk, and is not
covered in the warranty terms.
