Mesko MS 4624 Manual De Uso página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
21. Never blend bones, ice, coffe or peanuts.
22. When changing accessories, be sure that device is NOT connected to electricity.
23. Short-time operating: Use the appliance for no longer than 30 seconds and leave it
cooled down completely before using again about 3 minutes.
24. Before first use, clean the device.
25. When cleaning device, do not use aggresive detergent, it may damage the cover of the
device.
PRODUCT DESCRIPTION (picture A)
1) Speed control
2) "TURBO" button
4) Cocktail blade
5) Blender rod (removable)
INSTRUCTIONS
MIXING BY BLENDER
The hand blender is suitable for the preparation of soups, sauces, baby meals as well as drinks and cocktails from fruits and vegetables.
The appliance is not intended to blending ice and meat food.
1. Turn the blender rod (5) anti-clockwise to assemble on the motor unit (3) of the blender.
2. Insert the blender rod (5) deep into a container filled with mixing products and switch on the blender with the button (1) for low speed
or (2) for fast "TURBO" speed.
3. To disassemble the blender rod (5) from the motor unit (3) turn it in adverse direction.
COCKTAIL PREPARATION in cup (6)
1. Ensure that all blender elements are clean. Warning: blades are sharp.
2. Place the ingredients cut in small pieces (smaller than 15x15x15mm) in the cup (6) – picture 1. Do not exceed 600 ml.
3. Attach the cocktail blade (4) by screwing them onto the cup (6) tightly until hear "click" – picture 2.
4. Place the cup (6) with assembled cocktail blade (4) on the motor unit (3)and turn it anti-clockwise direction – picture 3.
NOTE: DUE TO THE PROTECTION STRUCTURE OF COCKTAIL BLADE (4), IT CANNOT BE ASSEMBLED INTO MOTOR UNIT (3)
BEFORE YOU ASSEMBLE THE COCKTAIL BLADE (4) INTO THE CUP (6).
5. Connect the power cord to a power socket. ONLY INVERTED USE IS ALLOWED – picture 4.
NOTE: The cocktail blade (4) and cup (6) are ONLY allowed to stand upside down when processing food – picture 4.
6. Press the button (1) or (2) to turn on device.
7. After use, remove the power cord from the power socket.
6. Remove the motor unit (3) at first, next remove the cocktail blade (4) from the cup (6). You can close the cup (6) by lid (7) for
transportation. – picture 5.
CLEANING AND MAINTENANCE
1. Always unplug the appliance from the power supply before cleaning.
2. Do not immerse the motor unit (3) in water or any other liquid and keep away from wet.
3. Wipe the outside of the motor unit with only a slightly moistened cloth and polish with a soft dry cloth.
4. Wash the detachable accessories in soap water, such as blender rod, , cup, lid, cocktail blade. Rinse them with clear water and dry
them. Do not use scouring pads for the plastic materials. Do not place them in the dishwasher.
5. Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish of the appliance.
6. It is not allowed that assemble the motor unit and cocktail blade into the cup for storage – picture 6.
TECHNICAL DATA
Power: 600W
Power max: 1000W
Voltage: 220-240V~50/60Hz
Max working time: 30 seconds
Time to rest of device: 3 minutes
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
3) Motor unit
6) Cup
4
7) Cup lid

Publicidad

Tabla de contenido
loading

Tabla de contenido