Suncourt EQ2 REGISTER BOOSTER HC300 Manual De Instrucciones

INSTRUCTIONS FOR THE EQUALIZER
MODEL HC300
READ AND SAVE THESE INSTRUCTIONS
Instructions are available at www.suncourt.com
WARNING - To Reduce The Risk Of Fire, Electric Shock Or Injury To Persons, Observe The Following:
1. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
2. Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating
equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating,
Refrigeration and Air Conditioning Engineers (ASHRAE), and local code authorities.
3. When cutting or drilling into wall or ceiling, do not damage electrical wiring or other hidden utilities.
4. WARNING: To reduce the risk of fire or electric shock do not use with an extension cord.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to operate or install the product.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1) Use fan only for intended use, as described in instruction manual. Other use may cause fire, electrical shock, damage to the unit, or injury to persons and will void any
warranty by the manufacturer.
2) To protect against electric shock, do not immerse unit, plug, or cord in water or spray with liquids.
3) Close supervision is necessary when any appliance is used by or near children.
4) Unplug from outlet when not in use, when moving fan from one location to another and before cleaning. Turn the unit off before unplugging.
5) Never insert any object or allow any object to enter the Equalizer
6) Pressure on the grills of the Equalizer
7) Disconnect fan before cleaning. Do not use strong detergents or flammable liquids to clean the Equalizer
8) The motor of the Equalizer ® EQ2 is equipped with a thermal fuse. Blocking rotation of the fan or airflow may cause the motor to overheat. Should the motor overheat and the
fuse open, replacement of the motor is required.
9) Do not in any way block the air grills of the Equalizer
10) Do not use fan in a window. Rain may cause an electrical hazard. The Equalizer
area where it may come in contact with water.
11) Do not operate in the presence of explosive and/or flammable fumes.
12) Do not place fan or any parts near an open flame, cooking or other heating appliances.
13) Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been dropped or damaged in any manner.
14) To disconnect, grip plug and pull from wall outlet. Never yank on cord.
15) The housing of your Equalizer
dangerous electricity, may cause fire, and will void any and all warranty.
16) The Equalizer ® EQ2 is designed for indoor use only.
17) This product is intended for household use only and not for commercial or industrial use.
18) Do not use fan near curtains, plants, windows treatments, etc.
19) Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
20) Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from
traffic area and where it will not be tripped over.
21) WARNING: To reduce the risk of electric shock and injury to persons, do not use this fan near a door or window.
22) WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
POLARIZED PLUG
NOTE: This appliance has a polarized plug (one blade is wider than the other).
The polarized plug is not intended to be used in non-polarized outlets (having both slots the same size). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do not attempt to modify this plug or override this safety feature in any way.
POWER CORD SAFETY TIPS
1. Never pull or yank on the cord or the appliance.
2. To insert plug, grasp it firmly and guide it into outlet.
3. To disconnect appliance, grasp plug and remove it from outlet.
4. Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, this indicates that the appliance should be serviced
and the line cord replaced. Please return it to an authorized service representative.
5. Never wrap the cord tightly around the appliance, as this could place undue stress on the cord where it enters the appliance and cause it to
fray and break.
PLUG AND POWER CORD INSTRUCTIONS
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present
and the product should be discarded or returned to an authorized service facility for examination and/or repair.
®
® EQ2 may cause the fan impeller to contact these grills and damage the unit.
® EQ2.
® EQ2 is sealed at the factory. THERE ARE NO SERVICEABLE PARTS INSIDE. Attempting to open the housing will expose you to
EQ2 REGISTER BOOSTER
®
EQ2 through the grills, as this may damage the unit or cause it to malfunction.
EQ2 should never be exposed to moisture. Do not use the unit in a bathroom or laundry
®
® EQ2.
™