Shelter Logic AutoShelter 1015 Instrucciones De Ensamblaje página 5

3. ASSeMBle leGS & ATTAcH To rooF FrAMe
A. Assemble Corner and Middle legs.
B. Attach legs with bolts on one side of roof frame, let the other side of roof frame rest on the ground.
C. Attach remaining legs with bolts to opposite side of roof frame.
Corner Legs
802633
802634
802637
4. ASSeMBle coVer rAIlS
A. Place the cover rail
B. Slide the cover rails so they are 8" up from the ground and hand tighten bolts on clamps.
Middle Rib Cross Rail Clamps
802635
13201
13345
01010
01011
End Rib Cross Rail Clamps
13202
10115
800163
01011
01010
802637
Use Bolt
03032
802633
Use Bolt
10115
802635
Use Bolt
10115
12270
Corner Legs
at each leg and secure it at each leg with a cover clamp as shown below.
(800163, 13345)
10115
800163
Middle Legs
Use Bolt
03032
Use Bolt
10115
Use Bolt
10115
(Assembled Leg)
800163
FronT
Page 5
Use bolts as shown in illustrations.
Attach Legs to Roof Frame
802632
01010
03032
802497
01010
03032
800598
01010
802633
Middle Legs
800163
13345
800163
13345
reAr
13345
05-62681-0A