Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
necessary to loosen the lug nuts before lifting.
3.
This dolly is equipped with a screw adjustable rear caster that is manually raised or lowered to match the spindle angle.
4.
After the vehicle is raised and correctly blocked, push the wheel dolly in towards the tire/wheel combination to be lifted. The wheel
dolly lift arms should straddle the tire, and the sidewall of the tire should be as close as possible to the vertical portion of the lift
member. Raise the lift arms to meet the tire(s) and adjust the lift arm angles so the arms are in full contact with the tire(s).
5.
Secure the tire/wheel combination to the dolly with the safety restraint chain provided. Wrap the chain around the tire and secure the
chain hook or chain loop to the dolly. Remove the lug nuts.
6.
Continue to lift the tire/wheel combination until the entire weight is supported by the dolly lift arms. Back the dolly away to remove
the tire/wheel combination.
7.
When mounting wheels, load the wheels on the dolly and secure them to the dolly with the chain. Maneuver the dolly into alignment
with the axle.
8.
Carefully slide the wheels onto the axle by pushing the dolly towards the vehicle. It might be necessary to rotate the wheels so their
hole pattern will line up with the mounting studs.
9.
Secure the wheel to the hub in accordance with the vehicle manufacturer's directions.
PREVENTATIVE MAINTANCE
This is the safety alert symbol used for the PREVENTATIVE MAINTENANCE section of this manual to alert you to potential
personal injury hazards. Obey all instructions to avoid possible injury.
1.
Always store the wheel dolly in a well protected area where it will not be exposed to inclement weather, corrosive vapors, abrasive
dust, or any other harmful elements. The wheel dolly must be cleaned of sand, grit, oil, grease or other foreign matter before using.
2.
Lubricate moving parts once a month with a general purpose grease, particularly the rear caster adjustment thread.
3.
It should not be necessary to refill or top off the jack's reservoir with hydraulic fluid unless there is an external leak. An external leak
requires immediate repair which must be performed in a dirt-free environment by qualified hydraulic repair personnel who are familiar
with this equipment. Authorized Service Centers are recommended. IMPORTANT: In order to prevent seal damage and hydraulic
failure, never use alcohol, hydraulic brake fluid, or transmission oil in the hydraulic system. Use only hydraulic jack oil, NAPA #765-
1541 or 765-1542.
4.
Every wheel dolly owner is responsible for keeping the dolly label clean and readable. Use a mild soap solution to wash
external surfaces of the dolly but not any moving hydraulic components. Contact NAPA for a replacement label if your dolly label is
unreadable.
5.
Inspect the wheel dolly before each use. Do not use the dolly if any component is cracked, broken, bent, shows sign of damage, or
leaks hydraulic fluid. Do not use the dolly if it has loose or missing hardware or components, or is modified in any way. Take
corrective action before using the dolly again.
6.
Do not attempt to make any hydraulic repairs unless you are a qualified hydraulic repair person that is familiar with this equipment.
OWNER/USER RESPONSIBILITY
The owner and/or user must have an understanding of the manufacturer's operating instructions and warnings before using this jack.
Personnel involved in the use and operation of equipment shall be careful, competent, trained, and qualified in the safe operation of the
equipment and its proper use when servicing motor vehicles and their components. Warning information should be emphasized and
understood. If the operator is not fluent in English, the manufacturer's instructions and warning shall be read to and discussed with the
operator in the operator's native language by the purchaser/owner, making sure that the operator comprehends its contents. Owner and/or
user must study and maintain for future reference the manufacturers' instructions. Owner and/or user is responsible for keeping all warning
labels and instruction manuals legible and intact. Replacement labels and literature are available from the manufacturer.
WARRANTY
Please contact your local NAPA Auto Parts Store for details on warranty.
791-6005A
OPERATING MANUAL FOR 791-6005A
4
04/27/20
Publicidad
Tabla de contenido
