Motion R12 Serie Guia Do Usuário página 41

instruction manual, may cause interference with radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in
which case you will be required to correct the interference
at your own expense.
Class B Equipment: This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
The following information is provided on the device or
devices covered in this document in compliance with FCC
regulations:
Motion R12- Series Companion Keyboard Model Number:
RKB00
Company name: Motion Computing, Incorporated
8601 Ranch Road 2222, Bldg 2
Austin, TX 78730
Telephone: 512-637-1100
Fax: (512) 637-1199
Manufacturer name:
Compal Digital Technology (Kun Shan) Co., Ltd
No.9, Second Avenue, A Zone,
Kunshan Comprehensive Free Trade Zone, Kunshan,
Jiangsu, China
Telephone: 86-512-57352222
Fax: 86-512-55212188
Intentional Emitter per FCC Part 15
Embedded in your R12-Series Companion Keyboard are
various Radio Frequency (RF) wireless communication
devices. It may contain one or more radio-type devices that
operate in the following band:
• 2400–2496 GHz band
All radio-type devices embedded in your keyboard have
met all the qualifications for use under FCC regulations and
guidelines.
Airplane Mode
To put the keyboard into airplane mode, please hit Fn+Esc
to turn off the keyboard. The LED will blink Amber for one
second to let you know the keyboard is turned off.
R12-Series Companion Keyboard User's Guide
Modifications
The FCC requires that you be notified that any changes or
modifications made to this device that are not expressly
approved by Motion Computing, Inc. may void your
authority to operate the equipment.
Cables
Connections to this Companion Keyboard must be made
only with shielded cables. This reduces possible
interference with radio communications and complies with
FCC Rules and Regulations for this EMC classification.
IC Notice (Canada Only)
IC:4587A-HMRKB001
Connections to this Companion Keyboard must be made
only with shielded cables. This reduces possible
interference with radio communications and complies with
FCC Rules and Regulations for this EMC classification.
Unintentional Emitter per ICES-003
Motion Computing Companion Keyboards are classified by
the Industry Canada (IC) Interference-Causing Equipment
Standard #3 (ICES-003) as Class B digital devices.
This Class B (or Class A, if so indicated on the registration
label) digital apparatus meets the requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B (ou Classe A, si ainsi
indiqué sur l'étiquette d'enregistration) respecte toutes les
exigences du Règlement sur le Matériel Brouilleur du
Canada.
Intentional Emitter per RSS 210
Embedded in your Companion Keyboard are various Radio
Frequency (RF) wireless communication devices. It may
contain one or more radio-type devices that operate in the
following band:
• 2400–2496 MHz band
All radio-type devices embedded in your Companion
Keyboard comply with RSS 210 and RSS-102 standards of
Industry Canada. Operation of this wireless communication
device is subject to the following two conditions:
• This device may not cause harmful interference.
This device must accept any interference received,
including interference that may cause undesired
operation.
L'utilisation de ce dispositif est autorisée seulement aux
conditions suivantes: (1) il ne doit pas produire de
brouillage et (2) l'utilsateur du dispositif doit éntre prét a
accepter tout brouillage radioélectrique recu, meme si ce
brouillage est susceptible de compromettre le
fonctionnement du dispositif.
The term "IC" before the equipment certification number
only signifies that the Industry Canada technical
specifications were met.
This equipment complies with Industry Canada Radio
Frequency Electromagnetic Signal (RF) exposure limits set
forth for an uncontrolled environment of portable
transmission.
41