Tools required (not provided): Phillips screwdriver, stud finder, power drill and 1/8" drill bit.
47. Ask for assistance to position the assembled fireplace at the desired location against a wall. If necessary,
adjust the installed Floor Levelers at the Bottom Front Molding (N) to level the unit.
48. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach
the tip-over restraints to the unit and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the
Tipping Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents
or damage. The tipping restraints are intended only as a deterrent, they are not a substitute for
proper adult supervision. The tipping restraints are not earthquake restraints. If you wish to add
the extra security of earthquake restraints, they must be purchased and installed separately.
49. Connect the fireplace to a power transformer. Follow the separated operating manual of electric fireplace to
control your fireplace.
Assembly Instructions
33