Chapter Ii Safety Warning - SATA AE5881 Manual Del Uso

中文
EN DE RU KO PT JA ES
AE5881/AE5882/AE5883
Chapter II Safety Warning
1.Be sure to carefully read and fully understand the instructions herein before operation and use. Incorrect operation may result in
personal injury and product damage.
2.Pay attention to the power requirements indicated on the machine nameplate.
3.Please install a residual current circuit breaker for power supply.
4.For areas with 50HZ power supply, the control voltage is 220V±10%.
5.Please install a voltage regulator in areas with unstable voltage.
6.It is not allowed to share a power switch with the air compressor.
7.The connection using one 380V live wire and one ground wire is not allowed for single-phase 220V power supply.
8.Be sure to connect the ground wire before use.
9.The strand wire is likely to cause overheat. Do not use it for fear of danger.
10.Do not use splicing method for the extension of power cable, which may cause the machine not to operate due to the voltage drop.
11.The power cable diameter must be checked to meet the standards, which shall be not too small
stall a residual
current circuit
breaker
Grounding
Dryer power supply
work
Grounding
work
25