HAMPTON BAY PG169T-B Guía De Uso Y Cuidado página 8

Assembly (continued)
4
Assembling the Reflector
□ Place the heat insulation plate (B) onto the reflector
spacers (I), then attach the reflector (A) to the
reflector spacers (I) using acorn nuts (AA).
5
Assembling the Cylinder
□ Open the door on the housing assembly (E), turning
the connection end of the preassembled regulator
to face outward. Attach a 1 lb. LP-gas tank (sold
separately) to the regulator. Then, turn the regulator
until the tank is in an upright position. Close the
door.
8