Safety Warning; Cleaning And Maintenance - Conrad VIZCLEAR HD Manual De Instrucciones

Congratulations on the purchase of your VizClear
HD® Car Visor, the 2-in-1 visor for daytime and
night that enhances colour, clarity and contrast.
It reduces sun glare during the day and impro-
ves night vision because it softens the glare from
street lights and headlights that affect driving.
Please read these instructions and safety war-
nings carefully before using the product for the
first time.
Keep these instructions in a safe place for future
reference.

SAFETY WARNING

- The VizClear HD® Car Visor does not replace
the original sun visor in your vehicle.
- Ensure the product is properly installed before
starting up the vehicle.
- In some vehicles, the VizClear HD® Car Visor
may limit the movement of your vehicle' s visor.
EASY TO ASSEMBLY:
No tools necessary. Just attach it to the sun visor
in any car.
1. Place the car' s sun visor in the raised position.
2. Hold the VizClear HD® Car Visor with the
open part of the clip facing you (see Image
1).
NB: The lens should be below the clip.
3. Slide the clip of the VizClear HD® Car Visor
over the car' s visor in the area closest to the
vehicle' s windscreen. (See Image 2)
4. Remove the protective film from both sides of
the VizClear HD® Car Visor.
5. The visors/panels can be adjusted by rotating
the dark visor 180° and the yellow visor 90°
to adapt them to your needs. (See Image 3)
USING THE DAY LENS:
Use the day lens to reduce glare from sunlight.
Fold down the day lens to the lowered position
(see Image 4). The yellow lens for night vision
should be in the raised position when the day
lens is being used.
USING THE NIGHT LENS:
Use the night lens to reduce glare from street
lights.
Fold up the day lens towards the windscreen (see
Image 5).
Fold down the yellow night-vision lens to the
lowered position (see Image 5).
The yellow lens is mainly for night use, but can
also be used during the day.
Observation: Fold up both lenses (towards the
car' s visor) when not in use.

CLEANING AND MAINTENANCE:

• Do not touch the lenses with dirty or greasy
hands. It is easy to leave fingerprints, which
can reduce visibility.
• If your VizClear HD® Car Visor is dirty, clean it
with a microfibre cloth or a soft cloth.
• Clean your VizClear HD® Car Visor with mild,
non-corrosive soap. Do not use aggressive
chemical products, solvents or ammonia-
based products (such as window cleaners
or surface cleaners). Acrylic cleaners should
be used by following the product instructions.
The set includes:
• 1 VizClear HD® Car Visor (with 2 lenses: 1
day lens and 1 night lens)
• 1 instruction manual
Quality Warranty
This product is covered by a warranty against
manufacturing defects subject to the time perio-
ds stipulated by the legislation in force in each
country.
This warranty does not cover damages resulting
from inadequate use, negligent commercial use,
abnormal wear and tear, accidents or improper
handling.
Australia & New Zealand only
This product has the benefit of certain Consumer
Guarantees. These are prescribed by Australian
Consumer Law & the New Zealand Consumer
Guarantees Act 1993 both of which provide
protection for consumers. There is no express
warranty for this product in Australia or New Zea-
land. The above refers to other countries.
Made in China.
3