Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
1
Package Contents
Device x 1
2
Front Panel Information
HDD 1
Power Button
Power / Access LED Indicator
HDD 2
Power Button
Power / Access LED Indicator
HDD 3
Power Button
Power / Access LED Indicator
Fan Speed Control
The LED indicator illuminates blue after the hard drive is inserted into the
drive bay. The LED will remain off if the drive bay is empty.
The LED indicator will flash blue during drive access.
The fan speed control can be switched for High, Low and Auto settings.
In High, the fan is at the maximum output, 60% of maximum in Low mode,
and in Auto mode, the fan speed will adjust according to the cooling
requirements of the drives.
The USB 3.0 and USB 3.0 port on the front of panel is made for external
device usage.ln order to make them function,please make sure to connect
the USB 3.0 and the USB 3.0 connector (for front USB 3.0 port) on the rear
to the motherboard.
The fan will turn on once a hard drive is inserted.
1
English
User Manual x 1
USB 3.0
USB 3.0
M3*6 screws x 8
4 Pin to 15 pin
Power Connector
x 2
Publicidad
Resumen de contenidos para Icy Dock MB973SP-2B
- Página 1 English Package Contents Device x 1 User Manual x 1 M3*6 screws x 8 4 Pin to 15 pin Power Connector Front Panel Information HDD 1 Power Button Power / Access LED Indicator USB 3.0 HDD 2 Power Button Power / Access LED Indicator HDD 3 USB 3.0 Power Button...
- Página 2 English Rear Panel Information HDD 1 position of USB3.0 port HDD 2 of front panel HDD 3 3 Pin Fan Connector 2 Pin Fan Connector Power Port SATA Port The device is equipped with a 2Pin and a 3Pin connector for the fan power. please select the compatible one for the fan replacement.
- Página 3 English <B> Insert the hard drive with the SATA connectors facing towards the correct direction. Then close the door to complete the drive installation. <C> The USB 3.0 ports on the front panel is made for external device usage. In order to make them function, please make sure to connect the USB 3.0 header (for front USB port) on the motherboard.
- Página 4 1. ICY DOCK reserves the right to change unrelated technical specifications and is subject to change without prior notice. 2. ICY DOCK will not be liable for any software, hardware, or data stored within or interfacing with ICY DOCK products which results in damage or malfunction.
- Página 5 Español Contenido del paquete Dispositivo x 1 Manual del usuario x 1 Tornillos M3*6 x 8 2 x Conectores de alimentación de entre 4 y 15 pines Información relacionada con el panel frontal HDD 1 BOTÓN DE ALIMENTACIÓN INDICADOR LED DE ALIMENTACIÓN / ACCESO USB 3.0 HDD 2...
- Página 6 Español Información del panel posterior HDD 1 posición del puerto HDD 2 USB 3.0 del panel frontal HDD 3 Conector para ventilador de 3 contactos Conector para ventilador de 2 contactos Toma de alimentación Puerto SATA El dispositivo está equipado con dos conectores de 2 y 3 pines respectivamente para la alimentación del ventilador.
- Página 7 Español <B> Inserte el disco duro con los conectores SATA mirando en la dirección correcta. Cierre a continuación la tapa para completar la instalación del dispositivo. <C> Los puertos USB 3.0 del panel frontal están destinados al uso de dispositivos externos. Para utilizar este tipo de dispositivos, asegúrese de conectar el cabezal USB 3.0 (del puerto USB delantero) a la placa base.
- Página 8 2. ICY DOCK no asumirá ninguna responsabilidad por ningún software, hardware o dato almacenado en los productos ICY DOCK, o que interactúe con estos, que provoque daños o averías. ICY DOCK solamente asumirá la responsabilidad de reparaciones y tareas de servicio de productos ICY DOCK.