User Information; Technical Data; Getting Started - FINOHIT FH6750 Información De Uso

HIT Ultrasonic Unit
FINOHIT FINO FINO FINO HIT HIT
By purchasing this product you have made an excellent choice. FINOHIT quality
products from
FINO
1. FIELDS OF APPLICATION
Small but stable ultrasonic unit for the cleaning of dentures, spectacles and other small
objects. It reliably removes residues of polishing pastes and other dirt from the objects
you want to clean.
2.

TECHNICAL DATA

Voltage:
Consumption:
Cleaning frequency:
External dimensions:
Tank size:
Tank volume:
3. PROCESSING / INSTRUCTIONS

3.1 Getting started

Please check the unit for transportation damages immediately after unpacking. If there
should be any transportation damages the unit must not be plugged into your mains
supply. All transportation damages must be claimed promptly. Check the voltage given
on the type label of the unit and make sure it corresponds with your mains supply.
Is this the case you can connect the unit plug with a grounded socket.
Choose an n even and dry place of installation.
3.2 Operation
Fill the unit with approx. 400 ml water and maybe add a bit of cleaning agent. Place the
objects you intend to clean in such a way in the basket that no air bubbles are trapped
under the objects. The objects must not be in contact with each other. Close the lid of
the unit and switch it on using the ON - switch. The cleaning process can be
interrupted at any time with the OFF – switch. The unit switches off automatically after
approx. 3 minutes. Repeat the cleaning process if necessary.
FINO GmbHhMangelsfeld 18hD-97708 Bad BocklethTel.+49 97 08 90 94 20hFax +49 97 08 90 94 21h
FINO FINO FINO

User Information

convince through consistently high quality at economical prices.
220–240 V
50 W
42 Khz
20,3 x 12,7 x 14 cm
15,5 x9,5 x 3,5 cm
400 ml
English
FH6750
info@fino.comhwww.fino.com