Adjusting The Seating Position Of The Child Seat; Adjusting The Headrest - nurse Liberty ifix Instrucciones De Instalación

GB
liberty
1
USE IN THE VEHICLE
The child seat is approved for two different
methods of installation.
A. With vehicle's 3-point safety belt
B. With vehicle's 3-point safety belt in com-
bination with ISOFIX connectors locking into
vehicle's ISO FIX lower anchorages.
Important:
1. Always used in forward facing passenger
seat. We do not recommend to use the child
seat in the front passenger seat.
2. The safety belt must be approved to ECE
R16 or a comparable standard.
3. Never use the child seat in the passenger
seat equipped with 2-point belt seat.
2
ADJUSTING YOUR CHILD SEAT
2. Adjusting your child seat
2.1 Adjusting the seating position of the child
seat
The child seat can be used in multi seating po-
sitions for use of all groups. Pull the recline
handle, adjust the seat shell forwards or back-
wards. Release the handle in the required po-
sition and push until you hear a distinct click.
(2-A)

2.2 Adjusting the headrest

A correctly adjusted headrest ensures that
the diagonal seat belt section is optimally
positioned, and gives your child the optimal
protection.
The headrest must be adjusted so that there
is a space two fingers wide between the head-
rest and your child's shoulders.
To adjust the height of the headrest to fit your
child:
1. Reach into the adjustment handle on the
back of the headrest and pull it upwards. This
unlocks the headrest. (2-B)
2. You can now move the unlocked headrest
to the desired height. As soon as you release
the adjustment handle, the headrest will lock
into place. (2-C)
3. Place the child seat on the vehicle seat.
Have your child sit down in the child seat and
check the height. Repeat this process until the
headrest is at the optimal height. (2-D)
3
INSTALLATION IN THE VEHICLE
Installation with 3-point safety belt
1. Please make sure that the both ISOFIX con-
nectors are stowed in its original position (the
most inside position). If not, please pull&hold
20
the ISOFIX adjustment button, mean time
ifix
push back the ISOFIX arms back into the seat
base. Repeat the above, to pull back the arm
inthe other side. (3-A)
2. Place the child seat on the vehicle seat,
make sure the backrest of child seat is flush
with backrest of the vehicle seat. Tips: if the
headrest of the vehicle seat gets in the way,
please remove itorturn it in other way. (3-B)
3. Follow the steps in section 5 'Securing your
child 'to finish the installation.
4
Installation with 3-point safety belt in
combination with ISOFIX connectors
Please read the instructions on the use of
child restraint systems described in your ve-
hicle owner's manual. Find the ISOFIX anchor-
age points in the vehicle seat.
Tips: The ISOFIX anchorage points are locat-
ed between the surface and the backrest of
the vehicle seat.
1. Insert two ISOFIX guides to the ISOFIX
lower anchorages respectively. (4-A/4-B) ISO-
FIX guides make it easier to install using the
ISOFIX connectors and prevent damage to
the upholstery.
2. Pull the ISOFIX extend levers on the both
sides of seat base to stretch the two arms of
ISOFIX connectors respectively. (4-C)
3. Line up the ISOFIX connectors with the ISO-
FIX guides. Attach the two ISOFIX connectors
to the two anchorage points on the vehicle
seat respectively. You will hear two sound of
"Clicks". And check the ISOFIX indicator on
each side turns to green. (4-D)
4. Pull the ISOFIX extend levers at same time
to push the child seat as far back as it will go.
Make sure the back of child seat is against the
backrest of vehicle seat firmly. (4-E)
5. Follow the steps in section 5 'Securing your
child 'to finish the installation.
Unfastening your child seat
To unfastening your child seat, please pull the
ISOFIX release buttons on both sides.
5
SECURING YOUR CHILD
Important:
-Before securing your child in the child seat,
please make sure the headrest is adjusted to
the correct position (see section 2.2).
-Check your vehicle's manual to see if your
vehicle is equipped with ISOFIX lower anchor-
ages; choose one method of installation in
the vehicle, either section 3 or 4 was followed
correctly.
1. Have your child sit down in the child seat,