Technical Specifications - ResMed Quattro Air NV Manual Del Usuario

Technical specifications

Dead space
information
Therapy
pressure
Resistance
Environmental
conditions
Gross
dimensions
Mask fully
assembled with
elbow assembly
(no headgear)
Notes:

The mask system does not contain PVC, DEHP or phthalates.

This product is not made with natural rubber latex.

The manufacturer reserves the right to change these specifications
without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any
length of time. Store the mask in a dry place out of direct sunlight.
Disposal
This mask does not contain any hazardous substances and may be
disposed of with your normal household refuse.
Physical dead space is the empty volume of the mask to the end of
the swivel. Using the large cushions it is 214 mL.
0 to 40 cm H O
2
Drop in pressure measured (nominal)
at 50 L/min: 0.1 cm H
at 100 L/min: 0.5 cm H
Operating temperature: +41°F to +104°F (+5°C to +40°C)
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity: up to 95% non-condensing
Extra Small:
6.14" (H) x 4.06" (W) x 4.37" (D)
(156 mm (H) x 103 mm (W) x 111 mm (D))
Small:
6.14" (H) x 4.06" (W) x 4.41" (D)
(156 mm (H) x 103 mm (W) x 112 mm (D))
Medium:
6.89" (H) x 4.06" (W) x 4.41" (D)
(175 mm (H) x 103 mm (W) x 112 mm (D))
Large:
6.89" (H) x 4.06" (W) x 4.41" (D)
(175 mm (H) x 103 mm (W) x 112 mm (D))
O
2
O
2
English 7