Faucet Installation - Pfister PORTLAND LG34 Serie Manual De Instrucciones

Thank you for purchasing this Pfister product. All Pfister products are carefully engineered, and factory tested to provide long
trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated
instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Pfister
recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.
3
3 TOOLS RECOMMENDED
• Plumber's putty • Slotted screwdriver
• Adjustable wrench • Flashlight
Your installation may require new supply lines and / or shut-off valves or other additional
tools.
4
4D
4C
4 HANDLE ATTACHMENT
Place Lever Handle (4A) onto Valve Stem (4B) and secure with Fastener (4C) as shown.
Insert Decorative Button (4D) onto Lever Handle (4A).
ENGLISH
• Pliers
• Cloth
4A
4B

FAUCET INSTALLATION

5
These instructions cover four different
2
installations
Models
34-1P
For 3 Hole Installation
No Side Spray
Go To Step 6
Models
34-3P
For 3 Hole Installation
With Side Spray
Go To Step 8
Models
34-4P
For 4 Hole Installation
With Side Spray
Go To Step 11
Models
34-1P/34-4P
Single Post Option
Installation
Go To Step 14