Escali BT601 Manual De Producto página 10

Recommended separation distances between portable and mobile RF communications equipment
and the EQUIPMENT or SYSTEM -for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment and the Infrared
Thermometer.
The Infrared Thermometer is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Infrared Thermometer can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and
the Infrared Thermometer as recommended below, according to the maximum output power of the communications
equipment.
Separation distance according to frequency of transmitter m
150 kHz to 80 MHz
Rated
maximum
output
power of
trans-
mitter W
0.01 /
0.1 /
1 /
10 /
100 /
The Infrared Thermometer is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the Infrared Thermometer can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and
the Infrared Thermometer as recommended below, according to the maximum output power of the communications
equipment.
PRODUCT SUPPORT
The Escali BT601 is covered by a two year product warranty. Visit www.escali.com for more information.
24/7 Online support: https://escali.zendesk.com
Email support: feedback@escali.com
Phone support: 1-800-467-6408
ESCALI CORPORATION
3203 Corporate Center Drive, Suite 150, Burnsville, MN 55306, USA
Escali's liability is limited to two (2) times the cost of the product. © Escali Corp., Minneapolis, MN, USA. All rights
reserved. Escali, the Escali logo and other Escali marks are owned by Escali Corp.
80 MHz to 800 MHz
0.12
0.38
1.2
3.8
12
10
800 MHz to 2,5 GHz
0.23
0.73
2.3
7.3
23