Setting The Clock - memorex MX4137 Guía Del Usario

SETTING THE CLOCK

1
With the power off, press and hold
the MEM/CLOCK ADJ button; "12
H" or "24H" will blink.
4
1
2
1
Press the Tune/Skip/Search o 1 or
n 2 button to set the current hour. (If
you selected 12H mode, be sure to
observe the AM or PM indicators to
make sure you have set the hour
correctly.) Press the MEM/CLOCK
ADJ button 3 again; the minute digits
will blink.
X-BASS
1
With the power on, press the X-BASS button on the remote to
enhance the overall bass sound; "X-BASS" will appear in the display.
Press again for normal bass; "X-BASS" will disappear.
NOTE: If the EQ is set to the CLASSIC, ROCK, POP, JAZZ mode
when you press the X-BASS button, the EQ function will be turned off.
Press the X-BASS button again to enhance the overall bass sound.
OPERATING INSTRUCTIONS
2
2
1
Press the Tune/Skip/Search o 1
or n 2 button to set the unit to the
24 hour (24 H) mode (also known
as military time) or 12 hour (12 H)
mode.
5
3
2
1
Press the Tune/Skip/Search o 1
or n 2 button to set the current
minute. Press the MEM/CLOCK
ADJ button and the time will be
set.
1
3
Press the MEM/CLOCK ADJ
button and the hours will blink.
3
8
1