USING THE GRINDING ATTACHMENT
Use the grinding attachment for spices, nuts, coffee
beans and other dry foods.
IMPORTANT: The grinding attachment is NOT suit-
able for processing liquids because they may leak
during use.
1. Check that the speed control is off.
2. Unscrew the grinding blade assembly from the
bottom of the grinding cup.
3. Add the ingredients to be ground. For best
results don't fill the cup past the MAX mark. (D)
4. Refit the grinding blade assembly. Tighten firmly.
5. Lower the assembled grinding attachment onto
the motor unit.
6. Place the palm of your hand over the top of
the grinding attachment and press firmly
downwards. (E) Maintain this pressure during
processing to steady the grinding attachment.
7. Press Pulse for a second or two, then release it. (E) Check the results and
repeat as required.
8. To process continuously, press the button for your desired speed. Use the
lower speeds for more coarse grinding and the higher speeds for more
fine grinding
9. Don't operate the grinding attachment for longer than 30 seconds.
10. Once processing has finished, remove the grinding attachment, carefully
unscrew the blade assembly and empty out the contents.
Note: Make sure grinding cup is completely dry when making bread crumbs,
chopping nuts, or grinding coffee beans.
D
E
7