BOERBOEL GardDog Instrucciones De Instalación página 5

Mounting Striker To Gate Upright
2
a.) Align the striker along the edge of the gate upright
in the closed position with the latch. Mark the two
holes on the front of the striker (Fig. 11).
b.) Mark the third hole on the side of the striker, and
pre-drill all three holes of the striker using a
bit (Fig. 12).
c.) Secure striker to gate using three 1" screws (Fig. 13).
⁄ ⁄ " drill ⁄ ⁄
3 3 3
32 32
Fig. 11
Fig. 12
Mark Mark
and and
Pre-drill Pre-drill
Fig. 13
5