Tabla de contenido
Publicidad
10x8 and 10x16 F L O O R K I T
I N S T R U C T I O N S (CONTINUED)
C
96"
(244 cm)
C:
Position a 48 x 96" Floor Panel
two 2" nails at outside corners and one 2" nail at other corners.
D
D:
Position a 23-7/8" x 96" Floor Panel
with one 2" nail at outside corners.
Position the other 48" x 96" Floor Panel
panel with two 2" nails at outside corners and one 2" nail at each of other corners.
Note: Mark a line on the Floor Panel over the center of each Floor Joist using a pencil and a piece of lumber from the kit
(or use a chalk line) to make nailing easier.
With Floor Panels flush to outside edges of Floor Frame, nail with 2" nails every 12" through Floor Panels into all
Floor Bond Boards and Floor Joists.
Your Floor is now complete. Check to be sure it is properly positioned and leveled to ground before beginning
assembly of your Wooden Storage Building.
C
B
120"
(244 cm)
D
flush to the outside edges of sides and back of Floor Frame. Secure panel with
through Floor Panels into all
Floor Bond Boards and Floor
32"
(81 cm)
16"
16"
(41 cm)
(41 cm)
D
(2) 3" nails between every joist as shown
FOR 10 x 16 FLOOR BUILD TWO 10 x 8 FLOORS,
ATTACH PRIOR TO INSTALLING FLOOR DECKING
E
flush against first panel and flush to edges of Floor Frame. Secure panel
D
flush against second panel and flush to edges of Floor Frame. Secure
10x8 and10x16 Floor Instructions
D
A
Nails every 12" (30 cm)
Joists
12"
(30 cm)
E
2" Nails
(5 cm)
32"
2" Nails
(81 cm)
(5 cm)
16"
(41 cm)
D
(2) 10x8
Publicidad
Tabla de contenido
