Publicidad
Instrucciones
1. Instale la versión más reciente de Citrix Receiver.
2. Habilite Bluetooth desde el iPhone o iPad. Coloque el
interruptor de la parte inferior en Sí para habilitar X1 Mouse.
3. Inicie Receiver y habilite X1 Mouse desde las opciones
de Configuración del menú Receiver ubicado en la parte
superior derecha.
4. Presione el botón Conectar en la parte inferior del mouse.
5. Aparecerá la ventana emergente de iOS para emparejar
el mouse, presione OK.
6. Una vez emparejado, podrá ver el cursor del mouse;
tenga en cuenta que el clic del mouse funcionará
únicamente dentro de la sesión de HDX.
7. En caso de cualquier inconveniente (por ejemplo, si no
aparece el cursor del mouse) haga lo siguiente:
a. Arrastre la aplicación Receiver hacia arriba para terminarla.
b. Vaya a Configuración->Bluetooth (ubique Citrix X1
Mouse), presione i y, a continuación, Olvidar este
dispositivo.
c. Repita el proceso de emparejamiento de los pasos 2 a 4.
Notas:
• La aplicación Receiver con un iPhone también puede
admitir monitores externos mediante un cable VGA/HDMI.
• Citrix X1 Mouse funcionará además como un mouse
Bluetooth 4.0 estándar con una PC o dispositivo Android.
(Se requiere volver a emparejar).
• Citrix X1 Mouse solo funcionará con Receiver u otras
aplicaciones Citrix compatibles, no con aplicaciones iOS
estándar.
• Citrix X1 Mouse funciona con iPad 3 o versiones
posteriores y iPhone 4s o versiones posteriores.
• No empareje el mouse con iPad o iPhone a través de la
configuración iOS.
• Para obtener más información, consulte Citrix.com/Mouse.
FDA: The Citrix X1 Mouse is a Class 1 laser product in accordance with
IEC 60825-1 A1 A2 and 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007. Caution: Modification
of this device may result in hazardous radiation exposure. For your safety,
have this equipment serviced only by an Authorized Service Provider. A Class
1 laser is safe under reasonably foreseeable conditions per the requirements
in IEC 60825-1 AND 21 CFR 1040. However, it is recommended that you do
not direct the laser beam at anyone's eyes.
FCC ID: 2AEDSX1BTLE. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Important: Any changes or modifications not expressly approved by Citrix
Systems Inc. could void the user's authority to operate this equipment.
Responsible party information Citrix Systems Inc. 4988 Great America Pkwy,
Santa Clara, CA, 95054
This product complies with the requirements set out in the Council (European
Parliament) Directive on the Approximation of the Laws of the Member
States relating to Electromagnetic Compatibility of Radio and Telecom device
(1999/5/EC) and restriction of the use of certain hazardous substances in
electrical and electronic equipment 2011/65/EU.
IC: 20012-X1BTLE. This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions: 1.This
device may not cause harmful interference; 2.This device must accept any
interference received, including interference that may cause undesired
operation of the device.
Cet appareil est conforme à Industrie Canada une licence standard RSS
exonérés (s). Son fonctionnement est soumis auxdeux conditions suivantes:
1. Cet appareil ne doit pas provoquer d'interférences; 2. Cet appareil doit
accepter toute interférence reçue, y compris les interférences pouvant
provoquer un fonctionnementindésirable de l'appareil.
Radiation Exposure Statement: The product complies with the US/Canada
portable RF exposure limit set forth for an uncontrolled environment and is
safe for intended operation as described in this manual. Further RF exposure
reduction can be achieved if the product can be kept as far as possible from
the user body or set the device to lower output power if such function is
available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables
RF pour les Etats-Unis et le Canada établies pour un environnement non
contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel.
La réduction aux expositions RF peut être augmentée si l'appareil peut être
conservé aussi loin que possible du corps de l'utilisateur ou que le dispositif
est réglé sur la puissance de sortie la plus faible si une telle fonction est
disponible.
IFT: RCPCIX115-0584. "La operación de este equipo está sujeta a las
siguientes dos condiciones:1.es posible que este equipo o dispositivo no
cause interferencia perjudicial y; 2. este equipo o dispositivo debe aceptar
cualquier. interferencia, incluyendo la que pueda causar su operación no
deseada"
Publicidad
