NORTH STATES 5264 Manual De Instrucciones página 3

i
Your safety gate contains the following:
x4
A B C
Installation and Operation
Measure opening and determine number of extensions needed for the gate.
Adding Extensions: remove upper and lower caps on the gate frame.
NOTE: If it is di icult to remove, use wrench provided to help.
Connect the extension bar to both upper and lower extension connectors. Insert extension into gate frame.
No extensions
29.75"-33"
1
G
A
Attach gate stopper to the lower bar on the door frame.
NOTE: Insert gate stopper so the arrow is facing up and stopper knobs slide down.
3
A
B C
Place tension knobs onto spindles,
insert spindles into gate.
i
5
x2 x1
I
L
M
F G H
D E
1 x 3" extension
33"-36"
4
Align and secure with wall cups onto
your wall with tape pads or screws.
J
K
2
Insert the front latch (L) and the back latch (M) into
the bottom of the pet door frame. Firmly connect
them together to lock into place. NOTE: Insert latch
so the release button is facing up.
D
C
NOTE: Make sure the bottom of the gate frame remains
completely at on the oor.
A. Tension Knobs
B. Spindles
C. Wall Cups
D. Tape Pads
E. Screws
F. Upper Extension Connector
G. Lower Extension Connector
H. Extension bar
I. Gate Stopper
J. Gate frame
K. Wrench
L. Front Latch
M. Back Latch
2 x 3" extensions
36"-39"
L
C E
C
E
Tighten both top and
bottom tension knobs
inward towards the gate.
Page 3
M