Insert / Replace Batteries - Kiddy kiddyfix Instrucciones De Operación

The power circuit is only closed and the electronic function only operational
when the support leg (F) is folded out.

3.1 Insert / replace batteries

Open the lid of the battery compartment (D) by lifting it upwards (Fig. 1).
Now remove the battery clip by pushing the opening tab to the back and lif-
ting out the clip. Now slide the battery clip to the back and remove it (Fig. 2).
You need 8 high-quality AAA batteries to operate your kiddyfix (A).
Insert the batteries in the 8 compartments.
Make sure the polarisation is correct. The markings on the bottom of the
compartment indicate how the batteries must be inserted (Fig. 3).
Now replace the battery clip. Close the lid of the battery compartment (D).
Store batteries out of children's reach.
Never expose the product or the batteries to fire.
Do not use old batteries or batteries showing leaks or cracks. Empty
batteries can be disposed of free of charge at specialist dealers,
where batteries are sold.
5
ENG