Measurement Modes - Callaway Golf CALLAWAY TELÉMETRO LÁSER 300 Manual Del Usuario

MEASUREMENT MODES

1. Standard - Standard Mode is recommended when measuring
distances to larger objects.
2. P.A.T. (Pin Acquisition Technology) - P.A.T. Mode is best used
when measuring the distance to a flagstick or smaller objects.
To toggle between Standard and P.A.T Mode, PRESS the Mode
Button (M). When P.A.T. Mode is activated, the flagstick icon will
appear on the left side of the LCD display.
3. Scanning - To measure distances to multiple targets in succession,
HOLD Power Button. The Laser Indicator Box will flash and the
laser will continuously fire. Measurements will change as you scan
the landscape and change targets.
NOTE: While scanning in P.A.T. Mode, the measurement will only
change when a shorter distance is measured. This is useful when
measuring the distance to a flagstick when there are trees or other
objects in the background.
4. Unit of Measure - To change the unit of measure from Yards
to Meters, PRESS Power Button to power on, then HOLD Mode
Button (M). The unit of measure is indicated by a "Y" or "M" shown
directly to the right of the distance displayed.
6 HOW TO USE
(Fig. A)
(Fig. B)