Packard Bell Easy Guia Del Usuario página 24

All manuals and user guides at all-guides.com
Easy DVD Recorder User's Guide
Search Press GOTO to access the search menu (press GOTO repeatedly to
access the three modes: title, chapter or time).
Use the number buttons to select a title, and press OK to play.
Some DVD discs may not support time searching mode.
Skip
Press
Repeat
1. Press DISPLAY twice to access the setup menu during playback.
2. Use the UP/DOWN arrow buttons to highlight the MODE item, and
press OK.
3. Use the UP/DOWN arrow buttons to highlight the A-B REPEAT item,
press OK to mark the start point (A); press OK again to display the A-B
REPEAT item, and press OK for the third time to mark the end point (B).
The section between the start and end points will be played repeatedly.
4. Press DISPLAY to exit the menu.
Repeatedly press REPEAT during playback to repeat title/chapter/disc,
and to resume normal playback.
Disc menu 1. Press MENU to show the disc menu.
2. Use the arrow buttons to select a title, and press OK to start playback.
Alternatively, use the number buttons to play a selected title directly.
For VCD discs, press STOP to access the upper menu (PBC ON). For VCDs 2.0 and above,
pressing the number buttons during playback will trigger no action.
Playing in Press MENU to switch between playback control (PBC ON) and PLAY
sequence IN SEQUENCE (PBC OFF) mode.
For SVCDs and VCDs 1.0, 1.1, the player will enter the PLAY IN SEQUENCE mode after the
disc is loaded. In this mode, you can press number buttons to select a title, including during
playback. Some discs will start to play automatically.
Viewing angle When playing a DVD, press ANGLE repeatedly to toggle between up to 9
viewing angles.
or to skip to the previous / next title or chapter.
A-B Repeat
Title/chapter/disc repeat
22