Hannah Montana HM1310ATVD Manual Del Usuario página 8

IMPORTANT SAFETY INSTRUCTIONS
FIGURE A
EXAMPLE OF ANTENNA
GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE
INSTRUCTIONS
2
a. Use No.10AWG (5.3mm ) copper, No.8 AWG (8.4mm
copper-clad steel or bronze wire, or larger, as a ground wire.
b. Secure antenna lead-in and ground wires to house with stand-off insulators spaced from
4-6 feet (1.22-1.83m) apart.
c. Mount antenna discharge unit as close as possible to where lead-in enters house.
d. Use jumper wire not smaller than No.6AWG (13.3mm
separate antenna grounding electrode is used.
8
2
) aluminum, No.17AWG (1.0mm
2
) copper, or the equivalent, when a
2
)