Mounting Hardware - Allen-Bradley 6181 Instrucciones De Instalación

4
6181 Industrial Computer

Mounting Hardware

The 6181 Computer is shipped with the following mounting hardware:
Table A
Mounting Hardware
Item Description
Self-locking nuts
(#10-32)
Mounting clips
Tools Required
In addition to the tools required to make the cutout, you will need the
following tools:
For Mounting Studs:
3/8 inch socket
6 inch (15 cm) extension rod (minimum)
Socket driver (in/lb. torque wrench recommended)
Ruler
For Mounting Clips:
Flat blade screwdriver
Ruler
Publication 6181-IN002C-MU-P
Quantity Use For
10 Panel or enclosure
(8 required) mounting
6 Panel or enclosure
mounting