STACK-ON TC-16-GB-K Instrucciones página 3

PARTITION ASSEMBLY
Lay the cabinet on its back on a protective surface.
Position the two partitions in the cabinet with the bo om and front edges
facing in the direction of the arrows as shown. Align with the holes in the
bo om of the cabinet and install and tighten (2) type "A" nuts and bolts for
each partition.
FRONT
FLANGE
A
TOP SHELF ASSEMBLY
Position the top shelf so the front and side edges point down. Assemble the
top shelf to the center partitions and the sides of the cabinet using (8) type "A"
nuts and bolts.
Do not tighten these nuts and bolts until the adjustable shelves are
installed as described later in these instructions.
A
3
27
40350-1309