Sanus VuePoint FPA400 Manual Del Usuario página 7

3. Drill pilot holes.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 3 mm (1/8 in.) diameter drill bit.
4. Tighten the lag bolt 01 and washer
CAUTION:
Improper use could reduce the holding power of the lag bolt and screw. DO NOT over-tighten the lag bolt and
screw.
3
the screw only until they are pulled firmly against the wall plate
03 02
63.5 mm
(2½ in.)
3 mm
(1/8 in.)
4
01
02
STEP 1
.
06
03
06
7