Descargar Imprimir esta página

Work MERGER DMX Instrucciones De Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

When there are signal inputs via DMX Input interfaces, DMX indicator A and B will be lit
3.
up to imply two ways ( A and B ) signal inputs.
Note: If only one way signal input is available, the relative DMX indicator A/B will be lit up.
4.
Set the function modes
Be clear that which mode this unit can be set. There are
only three function modes for your choice :
HTP ( High Take Precedence ) mode, Backup mode
and Merge mode.
HTP Mode
Set dip-switch 1 and 2 to "Off" position, this unit will be in HTP (High Take Precedence) mode.
When two DMX signals are present, the bigger value DMX signal will take precedence and
override the other DMX signal.
BACKUP Mode
Set dip-switch 1 to "On" and 2 to "Off" position, this unit will be in BACKUP mode. When DMX
signal A is available, it will occupy DMX output. When DMX signal A is not available, DMX signal
B will take the place of A.
MERGE Mode
Set dip-switch 1 to "Off" and 2 to "On" position, this unit will be in MERGE mode, you can merge
DMX signals A and B into a new one for DMX output by the setup of dip-switches 1-9. In this case
you must set the DMX starting address in the Merge mode.
For example, if the 6
normal, you can set dip-switches 1, 2, 3 to "On" and the others to "Off" position, the 1th to 6th DMX
output channels will be controlled by 1-6 channels of DMX signal A, and the 7th DMX output
channel will be controlled by the 1th channel of DMX signal B, the 8th output by the 2nd channel
of DMX B, and so on. In this way, the two signals can be merged into one signal output of 24
channels.
Note : If you set dip-switch 1 to "On" and the others to "Off" position, all DMX channel output
will be started by the 1th channel of DMX signal B.
Here are DMX Address Setting Diagram and DMX Address Table for matching dip switches
as your reference.
DMX Address Setting
Dip-switch #
1
2
3
on
off
(1)
(2)
(4)
1 2
1 2
1 2
channels
of DMX input A and the 18 channels of DMX input B works
4
5
6
7
8
9
10
(8)
(16)
(32)
(64)
(128)
(256)
1 2
DMX Address Table
DMX B
DIP-SWITCHS
START
ON
CH#
1
1
2
2
1, 2
3
4
3
1, 3
5
2, 3
6
1, 2, 3
7
8
4
1, 4
9
2, 4
10
MODE
HTP
Backup
Merge
DMX B
DIP-SWITCHS
START
ON
CH#
1, 2, 4
11
3, 4
12
1, 3, 4
13
14
2, 3, 4
1, 2, 3, 4
15
16
5
:
:
:
:
:
:
1,2,3,4,5,6,7,8,9
511

Publicidad

loading