Connecting To A Power Source - Kobalt A071006 Manual Del Usuario

OPERATING INSTRUCTIONS

CONNECTING TO A POWER SOURCE

Use only an extension cord recommended for outdoor use.
Insert the power plug of the blower into the extension cord.
Secure the extension cord to the appliance using the molded in cord-lock feature.
Plug the extension cord in to the power supply.
STARTING, STOPPING AND ADJUSTING THE AIR SPEED
1. STARTING/STOPPING THE BLOWER
• Ensure that the blower is disconnected to the power supply.
• Squeeze the trigger to start the blower.
• To change speed, squeeze the trigger to increase the speed and release the trigger slightly to
decrease the speed.
• Release the trigger completely to stop the blower.
2.USING CRUISING CONTROL LEVER
• This blower is equipped with a cruise control function.
• Squeeze the trigger to start the blower.
• Once the blower is on, pull back the cruise control lever clockwise to increase the speed. This
will lock the speed at the desired setting.
• To decrease the speed, push the cruise control lever counterclockwise to decrease the speed to
the desired setting.
Extension cord Cord lock
10