Kenmore 116.34924 Manual Del Propietário página 19

• _!i,i:i_i:i!!f i:,i _ i l : : ii_! _i: !:i ii!: !_ i i :i _i,_i:i , _ :!: i i ii !i:! _i::i_ i _ i _ ; :i!i_i i::i ,!! ! i : i
Review this table to find do-it-yourself solutions for minor performance problems Any other
service needed, should be performed by a Sears or other qualified service agent.,
i:,J
Vacuum cleaner
won't
run,
Poor job of dirt
pick-up.
1, Unplugged al wall outlet
2o Tripped circuit breaker/blown fuse
at household serv{ce panel
3,, Thermal protector tripped
1, Full or clogged dust bag
2. Wrong pile height setting
3_ Worn agitator
4. Clogged nozzle or bag holder,
5. Clogged hose
6, Hole in hose,
7, Hose not inserted fully
8, Motor protection system activated
9 Dirty filters
1.
2_
3_
Plug in firmly, select the desired set-
tingon the touchcontrol
Reset circuit breaker or replace fuse
Unplug vacuum cleaner allow to cool
and thermal protector wilt reset itself,
t_ Change bag
2o Adjust setting..
3. Take to your nearest Sears
Service Center
4,, Check CLOG REMOVAL
5o Check for clogs
& Take to your nearest Sears
Service Center
7_ Insert hose fuify
& Check for clogs,
g. Change motor safety filter and
exhaust filter
Vacuum Cleaner picks up I, Wrong pile height selling 1 Adjust setting
moveable rugs or
pushes too hard.
Light won't work, Change light bulb
Agitator does not turn. Move handle from upright position
Performance indicator,
some models, fs red°
1,
2,
3,
I_ Burned out light bulb
I. Handle in full upright position
2o Agilator Overload tripped
3, Thermal protector tripped
1. Full or clogged dust bag
2. Dirty filters,
3. Clogged airflow passage
4. Certain attachment tools
Reset Agitator Overload
Unplug vacuum cleaner allow 1ocool
and thermal protector will reset itself
1, Change bag
2 Change motor safety filter and
exhaust filler
3,, Clear clog from airflow passage
4, This is normal Light should go off
when tool is removed
Air flow restricted '1, Attachment use restricts air flow 1. Check ATTACHMENTS,
with attachment use°
Sound changes. 2. New carpet fuzz clogged air path 2. Check CLOG REMOVAL and clean
hose
Dirt Sensor, some 1, Dirty optic cells 1, Clean optic ceils
models, will not work,
Difficulty adjusting pile 1. Vacuum cleaner not in upright 1. Tilt vacuum cleaner to upright
height setting position, position.
19