Sentinel Eliminator Manual De Instalación página 7

EN
Step 7:
Refill system and check carefully for
any leaks.
Open
Step 8:
After filling the system with water,
open bleed valve using a suitable
screwdriver to release air trapped in
filter. Once water starts to escape,
close valve. After the system has
been running, repeat if nessesary to
release any trapped air. Check again
for leaks.
Fig. 6
7
Eliminator V2-CM-03-17
Eliminator Instructions V1-CM (14-03-17) (inc Spanish).indd 7 14/03/2017 14:20