Setting The Color Temperature - Sun GDM-17E20 Manual De Instrucciones

Adjustments
Adjusting the Convergence
The adjustment data becomes the common setting for all
input signals.
1
Press the button.
The OSD (On Screen Display) appears.
2
For vertical adjustment
Press the ¨ ./ >buttons.
. . . . to move Red down and Blue up
> . . . to move Red up and Blue down
For horizontal adjustment
Press the > ?// buttons.
? . . . to move Red to the left and Blue to the right
/ . . . to move Red to the right and Blue to the left
To erase the OSD, press the
The OSD automatically disappears 10 seconds after
you release the buttons.

Setting the Color Temperature

The selected color temperature becomes the common setting
for all input signals.
1
Press (option) button.
The option OSD (On Screen Display) appears.
8
2
3
0 23
button again.
To erase the OSD, press the
The OSD automatically disappears 30 seconds after you
release the buttons.
81.0KH / 76H
Z Z
Press > / button.
The color temperature OSD appears.
Adjust with > ?// and ¨ ./> buttons.
There are three color temperature modes on the OSD.
The factory settings are 1 : 5000K, 2 : 6500K, and 3 :
9300K.
To select 5000K, 6500K or 9300K
Press > ?// buttons.
To obtain the desired color temperature
1 Press > ?// buttons to select the 1, 2 or 3 mode.
2 Press ¨ ./> buttons to select R, G or B.
3 Press > ?// buttons to adjust the color
temperature.
The "5000K", "6500K" or "9300K" disappears.
The new color temperatures are memorized for each
mode-1, 2 or 3.
button again.
5000K
1 2 3
R 50
G 76
B 70
5000K
1 2 3
R 50
G 76
B 70