Publicidad
increase the height. Slowly push down to reduce height and land. 'Control Stick
A' is extremely sensitive so please move gently. Move down 'Control Stick A' to
bring the drone to a landing.
Turn Left and Right: Whilst holding the drone in a controlled hover, push
'Control Stick A' right to turn clockwise and left to turn anti-clockwise. Please
ensure that you maintain the hover with 'Control Stick A' .
Fly Forward and Back: Whilst holding the drone in a controlled hover,
push the 'Control Stick B' slowly forward to fly forwards and back to fly
backwards. Whilst flying forwards/backwards continue to control 'Control
Stick A' to adjust left/right turn and maintain height.
Sideways Left and Right: Whilst holding the drone in a controlled hover,
push 'Control Stick B' slowly to the right to fly the drone sideways to the
right, or to the left to fly the drone sideways to the left. Ensure there is a
minimum of 3 metres space surrounding the drone.
F. TRIM CONTROL
1. If the drone spins undesirably clockwise/anti-clockwise (T1/T2).
Push the trim button the opposite direction to the undesired movement.
For example, if the drone is spinning right while hovering, push the T1
button (left spin trim) to correct. 2. If the drone leans undesirably
either left or right (T3/T4). Push the trim button the opposite direction
to the undesired movement. For example, if the drone is leaning left while
hovering, push the T4 (right lean trim) button to correct. 3. If the drone
leans undesirably either forwards or backwards (T5/T6). Push the trim
button the opposite direction to the undesired movement. For example, if
the drone is leaning forwards while hovering, push the T5 (backward trim)
button to correct.
G. ATTACHING DRONE TO THE CHASSIS
Ensure the Drone Racer is switched off. 1. Support the chassis with one hand.
2. Using your other hand, hold the drone on the main body with your finger
and thumb and gently place the drone towards the back of the drone clip on
the chassis. Once in position move forward until you hear a click. The drone
is now secure to the chassis. When removing or connecting the drone to the
chassis always support the drone at the main body. Do NOT hold the drone by
the crash resistant frame, rotor blades or other parts of the drone.
H. DRIVING & DRIFTING
1. Driving forward - Slowly push 'Control Stick A' and 'Control Stick B' up
2. Drifting left - When the Drone Racer is driving forward move 'Control Stick
A' and 'Control Stick B' to the left position. 3. Drifting right - When the Drone
Racer is driving forward move 'Control Stick A' and 'Control Stick B' to the right
position.
I. FLIP 360
1. Fly the drone in a controlled hover at a minimum of 3 metres from the
ground. Ensure there is enough clear space with no objects nearby.
2. Press the Y button (top right shoulder) and move the control stick in the
direction you want to flip 360˚ (forward/backward/left/right) and the drone
will flip in that direction. Repeat steps 1 - 3 to perform another flip.
J. SPEED SETTING
Press the X button to adjust the speed level of your Drone Racer. 1. Press
once for beginner speed (1 'Beep') 2. Press again for expert speed
(2 'Beep'). Stunts and tricks can be performed on both speed settings.
K. HEADLESS FUNCTION
The Headless Mode feature allows the user to operate the drone without wor-
rying about the orientation of the drone. This feature is great for beginners as
it reduces the steepness of learning curve. 1. Place the Drone Racer on a FLAT
SURFACE with the black blades furthest away from you. 2. Press the Headless
Mode button (B). The drone will beep intermittently when in headless mode.
L. HOME FUNCTION
During flight, press the home function button (A) once and the drone will
autonomously return from a far away distance. Press the home function
again when the drone is within close proximity.
M. IMPORTANT! STABILITY RESET
If the product becomes unstable, push both left and right joysticks to the bottom
left position and hold for a few seconds. The handset will beep and the LED lights
on the drone flash. Your drone is now reset and stable.
TROUBLESHOOTING
Drone blades will NOT turn - Turn drone ON / Ensure drone is fully
charged / Check batteries in the handset / Turn drone and handset OFF and
ON again, and re-synchronise. Drone stops during flight - Ensure drone
is flown within the 25m range / Replace batteries in the handset / Charge
drone. Drone is NOT charging - Ensure USB charging cable is correctly
connected to the battery connector. Drone moving in an undesired
direction - Use the trimming buttons on the handset to precision trim (see
page 4 for reference). Drone LED lights are flashing during use -
Battery is low. Ensure drone is fully charged. Visit our website for any
further troubleshooting questions.
WARNING
This product is not suitable for anyone under the age of 8. Remove all
packaging before giving this toy to a child. Adult supervision
recommended. Colour and specification may vary. Please retain this
information for future reference. Warranty covers manufacturing faults
only and not damaged caused by user error. For indoor and outdoor
use. Only use Battery charger provided. Do not overcharge. Do not touch
spinning rotors. Keep fingers, hair and loose clothing clear from the rotor
blades when the vehicle is turned on. Risk of eye injury! Do not fly near
face to avoid injuries. Do not fly in adverse weather conditions. Fly in an
area appropriate for intended use, free of obstacles, animals and people,
keeping a minimum distance of 10 meters away. Maximum Range 25
metres. Do not fly out of range. Do not fly close to ceilings or walls. Motors
may become hot in flight - Do not touch. Operation is strictly forbidden
near high voltage poles, railway tracks, roads and swimming pools.
Always operate with direct visual contact. The charger used with the toy is to
be regularly examined for damage to the cord, plug, enclosure and other parts,
and in the event of such damage, they must not be used until the damage has
been repaired.
Declaration of Conformity: Declaration of Conformity accordance with
guidelines 2014/53/EU RED. Hereby, Bladez Toyz, declares that this item is
in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU (RED). The original declaration of
conformity can be viewed on the internet at: www.bladeztoyz.com/doc.
The Wheelie bin symbol indicates that the product and batteries must
not be disposed of with outher house hold waste as they may contain
elements which can have a harmful effect on the enviroment and human
health. Please use desigated collection points or recycling facilities when
disposing of the item and the batteries. Questions relating to this matter
should be directed to the organisation responsible for waste disposal or
your specialist retailer.
Warning! The manufacturer is not responsible for any radio or television
interference which may be caused by unauthorised modifications to the
equipment. Modifications of this nature may invalidate the users
consumer rights.
Battery Safety Information: Different types of batteries or new and used
batteries are not to be mixed. Non rechargeable batteries are not to be
recharged. Re-chargeable batteries are to be removed from the toy before
being recharged. Rechargeable batteries are only to be recharged under
adult supervision. Exhausted batteries are to be removed from the toy.
Supply terminals are not to be short circuited. Batteries to be replaced by
an adult. Batteries are to be inserted with the correct polarity. Alkaline
batteries recommended. Do not dispose of batteries in fire as the battery
may explode or leak. To prevent accidental operation please remove
batteries and power packs when not in use.
FRANÇAIS
A. INSTALLATION DES PILES
1. Utilisez le tournevis fourni pour retirer la vis du couvercle des piles à
l'arrière du combiné. 2. Mettez 4 piles AA / LR6 non rechargeables de 1,5V
dans le compartiment à piles, en respectant la polarité indiquée à l'intérieur.
3. Refermez le couvercle des piles et serrez la vis. Les piles doivent êtres
remplacées par un adulte. Des piles alcalines non rechargeables neuves sont
recommandées pour une utilisation optimale et des performances maximales.
Les voyants LED du drone clignotent lorsque les piles sont déchargées.
B. RECHARGE DEPUIS UN ORDINATEUR
Le Drone Racer est fourni avec une charge initiale qui vous permet de
commencer à l'utiliser immédiatement. Afin d'éviter toute surcharge de la
batterie, assurez-vous que la batterie soit complètement déchargée avant
de la recharger. 1. Assurez-vous que le Drone Racer soit sur arrêt. 2. Branchez
la prise USB à un ordinateur / port USB. NE PAS brancher le chargeur USB
dans un adaptateur secteur. 3. Insérez le connecteur à broches du câble
8
F
Publicidad
