STEINEL PROFESSIONAL HG 2320 E Manual Del Usuario página 7

k
A
k
B
k
C
k
D
Prod. No. 076467
k
E
Prod. No. 076566
k
F
10
Plastic repair kit for motor vehicles
Dear Customer
Thank you for purchasing the STEINEL plastic
repair kit for motor vehicles. This brochure
describes a new method of repairing motor
vehicle plastics. From now on, the special
What's different about this system?
The special welding rod can be used on all
thermoplastics. As a result, the painstaking
process of finding out the type of plastic you
want to work on now belongs to the past.
Important: the Multi-Thermoflexx welding rod
must always be used in conjunction with the
stainless steel wire mesh. It is highly flexible,
extremely resistant to stress cracking and
Contents
k Reduction nozzle, 9mm, Prod. No. 070601
A
k Vehicle repair nozzle
B
k Temperature guard, Prod. No. 076665
C
k Multi-Thermoflexx welding rod,
D
Prod. No. 076467
Additional safety notification
Not suitable for repairing:
– rubber parts
– pipes
– load-bearing parts
– film, foil or sheeting
Caution:
Unfamiliar plastics present a risk of
fire and poisoning. Carry out a
melting test on an inconspicuous
spot to identify the thermoplastic
material. Always ensure good ven-
tilation while working.
Do not inhale vapours.
For further details on the tool and its applications, please refer to the
HG 2320 LCD operating instructions.
welding rod and specially developed vehicle
repair nozzle will make it easier and save time
welding a whole host of plastic components.
bonds well with all thermoplastics. Thermoplas-
tics can be worked and re-worked over long
periods.
Best results can only be achieved with the
Multiflexx welding rod by using the vehicle
repair nozzle (see "This is how it's done").
k Stainless steel wire mesh, Prod. No. 076566
E
k HG 2320 LCD
F
Please note that when working
on the motor vehicle, its fuel may
increase the risk of explosion.
Always observe the safety warnings
in the operating instructions provid-
ed with the HG 2320 LCD.
11