Novellini Sense 4 Manual De Instalación, Uso Y Mantenimiento página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
ENGLISH
Description of remote control:
After inserting the batteries, the remote control searches for the
sauna with which it must dialogue.
This is why the bath must be connected to the supply mains.
When this operation has been completed successfully (soon
after inserting the batteries), the remote control emits a beep.
Your remote control is now ready for use.
To optimise the life of the batteries, the display goes off 20
seconds after the last command. To turn it on again, lightly press
any point of the display.
Turning on:
Hold the display down until the introduction appears.
Main commands:
1- HYDROMASSAGE
2- AUDIO FUNCTIONS
1
3- DISINFECTION
4- CROMOLIGHT
3
5- ALL FUNCTIONS OFF
6- ALARM
5
DREAM SYSTEM WHIRLPOOL
Whirlpool pre-selection menu:
Press button 1 on the main menu to access the whirlpool menu
where you can select the type of massage: Whirlpool and/or
Airpool.
10'
BACK TO THE
MAIN MENU
Whirlpool Menu Whirlpool:
Press button 1 on the main menu to access the
DREAM whirlpool menu which includes a variety of Whirlpool
massage:
12:33
2
4
6
12:33
7
SHIATSU back massage
Constant back massage
Alternating body massage
Constant body massage
Heater on
Heater off
The Whirlpool system allows you to choose between continuous
back massage, where we have pre-programmed a sequential
massage, or it can be stopped in its current position.
The settings can be changed when the whirlpool is operating.
The tub is equipped with a heater that is automatically activated
when the whirlpool is operating in order to avoid a rapid drop in
the water temperature.
To turn off the heater, press the icon.
Airpool Whirlpool Menu:
Press button 1 on the main menu to access the DREAM whirlpool
menu.
The DREAM system offers a variety of Airpool massage:
50% power massage
100% full power massage
The Airpool massage system turns on completely once selected,
and the massage turns on at full power.
The power can be reduced to 50% by pressing the Airpool
button a second time.
-36-
12:33
10'
12:33
10'

Publicidad

Tabla de contenido
loading

Tabla de contenido