Setting The Year / Month / Date / Time / Day Of The Week; Setting The Day Of The Week Display; Using The 12 / 24-Hour Display; Setting The Alarm - lidl Z30237B Instrucciones De Utilización Y De Seguridad

Setting the year / month /
date / time / day of the week
1. Press and keep pressed the WAVE button
approx. 3 seconds. The radio symbol
flashes.
2. Press and keep pressed the WAVE button
again for approx. 3 seconds to stop the recep-
tion of the radio time signal.
3. Press and keep pressed the SET button
approx. 2 seconds. The year display flashes.
Set the desired value by pressing the UP
DOWN button .
22
Tip: By keeping the UP
pressed you can accelerate the setting process
and reach the desired value more quickly. This
quicker method can also be used for making
the other settings. If during a period of 15 sec-
onds no buttons are pressed, the LC display
returns automatically to the default display.
4. Confirm your settings by pressing the SET but-
ton . The month display flashes.
25
5. Repeat steps 3 and 4 to set the values for day,
hour, minute and day of the week.
©
Setting the day of the week
display
The day of the week can be displayed in various
12
languages.
Press the DOWN button
In the day of the week display
ation for the current language appears. Release
the DOWN button
22
for your chosen language appears.
The following languages are available:
GER = German
FRE = French
SPA = Spanish
ITA = Italian
DAN = Danish
DUT = Dutch
ENG = English
for
21
2
21
for
25
or
23
or DOWN button
23 22
and keep it pressed.
22
, the abbrevi-
12
when the abbreviation
©

Using the 12 / 24-hour display

While time display
1
UP button to switch between 12- hour and
23
24-hour format.
Note: The AM icon
14
mornings in 12-hour format. The PM icon
on the LCD stands for afternoons in 12-hour
format.

Setting the alarm

Press the SET button
25
alarm 1 or alarm 2
15
Press and keep pressed the SET button
about 2 seconds. The hour display flashes.
Press the UP or DOWN button
23
the desired value.
Press the SET button
25
The minute display flashes.
Press the UP or DOWN button
23
the desired minute value.
Press the SET button
25
Press the SNOOZE button
alarm signal sounds. The alarm signal stops
sounding. The alarm will sound again 5 minutes
after the set waking time or alarm time.
Press any button except the SNOOZE button
to stop the alarm signal sounding.
Activating / deactivating the
alarm
Press the ALARM button
priate alarm symbol
played to indicate that the alarm is activated.
Pressing the ALARM button
the appropriate alarm symbol
to cease to be displayed. The alarm is deacti-
vated.
Operation
is indicated press the
on the LCD stands for
13
once or twice to select
.
16
for
25
to set
22
to confirm your setting.
to set
22
to confirm your setting.
as soon as the
20
20
briefly. The appro-
24
or is dis-
15 16
again causes
24
or
15 16
GB/MT 33