Auxilab ZFP009 Manual De Uso página 9

• Normal operation: Select TEMPER. Press the key → . Adjust the heating
temperature value by pressing ↑ or ↓. Then press OK.
• Select START to begin heating the plate. The set temperature (Setup) and the
temperature of the plate (Baker) will appear on the screen.
• To end the plate heating, press RESET. Turn off the equipment by pressing the
"ON-OFF" switch.
• Automatic operation: Select TIME. This screen shows SYS TIME, START TIME, and
EXIT TIME.
• Press → to adjust the SYSTEM TIME. Press ↑ or ↓ to adjust the hours. Press
→. Press ↑ or ↓ to adjust the minutes. Press OK.
• Select TIME again. Set the START TIME and the EXIT TIME. Press OK.
• Select AUTOMATIC. The display shows WAITING, the system time and the start
time for heating.
• When the start time comes, the screen shows the set temperature (Setup) and the
plate temperature (Baker).
• When the exit time comes, the screen shows again WAITING, the system time and
start time for heating.
• If you are not going to use the equipment again, turn it off by pressing the
"ON-OFF" switch.
Versión 1 julio 2018 ZFP009
8