Time Setup - PNI Clementine 8428BT Manual De Usuario

WARNING
The installation of this player in the car must be performed by qualified
personnel (car electrician) after having checked the type of power and audio
connectors on the car.
Some cars are equipped with sockets configured differently from the ISO
standard (different positioning of wires in the socket). If the car is not equipped
with ISO connectors, the necessary modifications must be made to the
connectors before mounting the player.

Time setup

1. Briefly press the CLK key. 00:00 will show on the screen.
2. Press and hold the CLK key again.
3. The hour indicator will flash. Turn the volume knob in both directions until
you reach the desired value.
4. Briefly press the CLK key to confirm.
5. The minute indicator will flash. Turn the volume knob in both directions
until you reach the desired value.
6. Wait a few seconds. The screen will return to the display mode before
setting the time.
Playback source selection
Press the MODE key to select between: Radio, Bluetooth and AUX-in.
• FM Radio
Searching the radio frequency
1. Press the MODE key repeatedly until RADIO appears on the screen,
immediately followed by the display of the current frequency.
2. Press the ◄ or ► key to search for another frequency.
3. Long press the ◄ or ► key to switch between MANUAL search and
AUTO search (the search stops when the radio reaches a signal).
User manual 6