Loading The Battery - HAMPTON BAY GT-7108-SSS Guía De Uso Y Mantenimiento

Installation (continued)
4

Loading the battery

U nscrew the battery box and insert the negative electrode side
of the battery into the bottom of the battery box .
O ver the battery with the plastic cover. (Fig.4 )
NOTE:
Please follow the above instructions
to replace the battery when needed.
5
Connecting the gas
Connect the pressure regulator (# 4 ) to the tank by rotating
the knob (# 5 ) clockwise until it is fully secured. (Fig.5 )
M ake sure there is no leakage or damage
Please refer to the " L eak Check" information and instructions
on how to check for hose or burner damage on page 14 .
IMPORTANT:
If the knob (#5) is not properly threaded to the
outlet of the cylinder, gas leakage can occur.
Close the front access door. (Fig.6 )
R emove the lid (B) and place rocks (H ) into the fire bowl, making sure
to keep the igniter block (# 6 ) open. (Fig.7 )
Fig.
13
H
Fig.
Fig.
Fig. 7