Power Connection / Initial Channel Search; On-Screen Menu Operation; Inputs; Setup - Sanyo DP50741 Manual Del Usario

GETTING STARTED
INITIAL CHANNEL SEARCH
Before proceeding, please make sure to hook up
your antenna or cable connection and all AV
equipment correctly to your HDTV.
1. PLUG IN AC POWER CORD
120V AC, 60Hz
2. TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
3. TV SET LOCATION SELECTION:
Select "Home Mode" to set the HDTV's backlight to
an Energy Star qualified level, or select "Store
Mode"to set the backlight to a retail display level.
Press ENTER on the desired option to continue.
4. CHANNEL AND AV SIGNAL SEARCH:
Select the Signal Search option and press ENTER to
perform a channel search from an Antenna or a direct
Cable connection, and a signal search from devices
hooked up to the HDTV's AV input jacks.
5. CHANNEL AND SIGNAL SETUP SCREEN
The final setup screen displays analog and digital
channels found as well as AV inputs detected.
Select Finish Setup and press ENTER.
NOTE: If you wish to repeat the Signal Search
process select Repeat.
AV INPUT SELECTION
Press the INPUT key to select the correct AV input for the
video source you wish to watch.
NOTE: Unused AV inputs may be disabled with the Input
Setting feature.

ON-SCREEN MENU OPERATION

INPUTS

Display the On Screen menu and use the CURSOR LM
keys to select Inputs. Press ENTER.
Inputs allows the direct selection of any AV input and
the removal of unused inputs from the AV input loop.
Use the CURSOR LM keys to select an AV input and
press ENTER.
To manage the available inputs press the INFO key to
enter the Skip Setting screen. Use the CURSOR LM
keys to select an AV input and press ENTER to disable
(uncheck) or enable (check) the highlighted input.

SETUP

Display the On Screen menu and use the CURSOR LM
keys to select Setup. Press ENTER.

Menu Language

Choose between English, Spanish and French for your
on screen menu's display language.
Press ENTER on the desired language.
Digital Captions
Captioning is textual information transmitted along with
the picture and sound. Turning Captioning ON (by
pressing the CAPTION key during normal TV viewing)
causes the HDTV to open these captions (digital or ana-
log) and superimpose them on the screen.
NOTE: Local broadcasters decide which caption signals
to transmit.
Use the CURSOR LM and
Background, and Foreground of DIGITAL caption text.
Need help? www.sanyoctv.com
keys to modify Font,
9
1-800-877-5032