Use - Beurer BY 33 Instrucciones Para El Uso

The battery must be charged for at least 16 hours before the device can be
first used independently of the mains; you may use the device during this
period.
Switch the parent unit on by pressing the
LED of the parent unit will light up green. The device is active.
If the parent unit battery is low the unit will beep twice. If the device is not
connected to a socket, it will switch off automatically after a short period. The
power LED will go out.
Operation with mains part
Using the mains part plug, connect the parent unit incl. battery to a socket.
The device automatically switches on. The power LED will light up green.
If the mains part plug is unplugged the device will switch to battery operation.
The standby time will depend on the battery charge status. To switch the de-
vice off press the
If there is no connection between the devices (baby unit not
switched on or out of range), an acoustic warning will sound on the
parent unit.

7. Use

Adjusting the volume
You can adjust the volume in 5 levels on the parent unit by pressing the
or button.
The sound intensity is also pictured using an LED noise level light
display so that the device can also be used by those with a hearing
impairment.
button for approx. 2 seconds, the power LED will go out.
button for 2 seconds. The power
26